20
9. Landlord Service (SEr)
9.1 Setting the Landlord Service (SErS)
1.
2.
3.
To set the landlord service, enter the landlord service settings
(see section 8.2). Use the dial to select SErS then press
>
Use the dial to enter the password 0000, using > to move to
the next digit. Then press
> to enter technical settings.
Use the dial to choose between the below options, then press
> to confirm and return to landlord service settings
OFF: Disables the service interval
1: Reminds the user when the annual service is due by
displaying SER in the screen 30 days before due date. The
operation of the system will not be affected.
2: Reminds the user when the annual service is due by
displaying SER in the screen 30 days before due date and
only allows the system to run for 45 minutes per hour after the
due date has passed
3: Reminds the user when the annual service is due by
displaying SER in the screen 30 days before due date and
only allows the system to run for 30 minutes per hour after the
due date has passed
4: Reminds the user when the annual service is due by
displaying SER in the screen 30 days before due date and
only allows the system to run for 15 minutes per hour after the
due date has passed
To Next Page
Loading...
