ESI ESRTP5 - Setting the Time and Date (tINE)

2. Setting the Time and Date (tINE)
N.B Please note, when first powered or in the event of a power
loss the time will be flashing and the time and date will need to
be set. Follow steps 2 - 6 to set the time on first setup. Changes
between summer and winter time are handled automatically by the
unit.
1. Press and hold
> until the display shows tINE then press >.
2. Turn the dial to adjust the hour then press
>.
3. Turn the dial to adjust the minute then press
>.
4. Turn the dial to adjust to the current day then press
>.
5. Turn the dial to adjust to the current month then press
>.
6. Turn the dial to adjust to the current year then press
>.
7.
3
Turn the dial to select between 12 or 24 hour format. Press >
to confirm and return to step 2. Press
< to return to previous
menu or leave for 1 minute to automatically return to home
-screen.