4
3. Operation Modes
Operation Modes: AUTO, MAN, OFF
Press > in homescreen to choose operation mode.
3.1.1. AUTO
- In Auto mode, choose All Day mode. See section 3.2 for details.
- In Auto mode, choose Holiday mode. See section 3.3 for details.
-
Temporary manual override of set temperature. In Auto mode,
the user can turn the dial to adjust the set temperature as below:-
1. In homescreen, turn dial to temporarily adjust temperature
2.
Temporary set temperature range: 5
o
C - 35
o
C. Default: 21
o
C
N.B: The temporary set temperature will not replace the original
program event’s set temperature. When the program event ends, it
will return to the default heating program automatically.
In Auto mode, if All Day mode or Holiday mode is not selected,
Auto mode will be used. In Auto mode, the thermostat will work as
per the user’s previous programming setting. Please see section
5 for details.
Press
> to confirm and return to homescreen. The display will
alternate between current room temperature and the time left
until the next programmed event. The temporary override will
end when the next programmed event starts.
To Next Page
Loading...
