Need help?Do you have a question about the ESI KeyControl 49 and is the answer not in the manual?
General| Brand | ESI |
|---|---|
| Model | KeyControl 49 |
| Category | Electronic Keyboard |
| Language | English |
Details the items included in the KeyControl 49+ box: keyboard, quick start guide, and USB cable. Some markets may include a software DVD.
Explains the USB connection for power and MIDI data transfer, compatible with Windows Vista, XP, and Mac OS X.
Describes the left-side buttons (Edit, Down, Up), wheels (Pitch Bend, Modulation), and velocity-sensitive keys used for control.
How to move the keyboard range up or down using Down/Up buttons. LEDs indicate octave status.
Step through program numbers using the Edit, Down, and Up buttons after pressing Edit.
Send MIDI note-off messages to all notes on all channels to restore system order.
Instructions to enter edit mode, select MIDI channel, and input value using numeric keys.
Assign MIDI controller numbers to the wheels (e.g., volume) via edit mode and numeric keys.
Set LSB or MSB Bank Select values using edit mode and numeric keys.
Enter specific program numbers using numeric keys after selecting the PROG key.
Choose between two velocity curves by entering 0 or 1 with numeric keys in edit mode.
Transpose the keyboard by half steps up or down using Transpose +/- keys; reset with Transpose 0.
Restore all settings to factory defaults by pressing Reset followed by Enter in edit mode.
Contact details for technical support and online resources, plus trademark information.
