ESI UGM192 - Installation; System Recommendation; Hardware Installation; Driver & Software Installation

ESI UGM192
6
2. Installation
2.1 System Recommendation
UGM192 is not simply a standard digital audio interface, but a high-resolution device capable of
advanced processing of audio content. Even though UGM192 is built to have low-CPU resource
dependability, system specifications play a key part in the UGM192s performance. Systems with
more advanced components are generally recommended.
Minimum System Requirements
PC
- Windows 7 / 8 / 8.1 or 10 (32- and 64-bit) operating system
- 1 available USB 2.0 or USB 3.1 port ("type A" or "type C")
Mac
- OS X / macOS 10.9 or higher
- 1 available USB 2.0 or USB 3.1 port ("type A" or "type C")
2.2 Hardware Installation
UGM192 is directly connected to an available USB port of your computer. The connection to your
computer is done either via a so-called "type A" or a "type C" port. For each connection type, a
separate cable is included in the package. Connect one end of that cable with UGM192 and the other
one to the USB port of your computer.
USB "type A" port of a computer USB "type C" port of a computer
2.3 Driver & Software Installation
After the connection of UGM192, the operating system automatically detects it as a new hardware
device. However, you should install our driver to use it with full functionality.
We strongly recommend to download the latest driver from www.esi-audio.com before installing
UGM192 on your computer. Only if our driver software is installed, all the functionality is provided
under Windows / OS X / macOS.
You can always find the latest drivers and software for both PC and Mac for your UGM192 by
going to this page in your web browser:
>>> http://en.esi.ms/111 <<<