Quick Start Guide
On both sides, rotate the Arm Dial forward
to extend or backward to retract the visor.
Slide the screens to center them over your eyes.
Set the Screen to Eye Distance
This guide and the videos that display on your eSight
will guide you through setting up your eSight and
learning the controls.
The complete process takes 30-45 minutes and
requires access to a computer or mobile phone with
an internet or Wi-Fi connection. While you can do
a partial setup in less than 10 minutes, completing
the full process is recommended.
If you have a companion helping you set up eSight,
they can view more detailed information about
eSight at www.eSightEyewear.com/support
Let’s begin!
4000834 Rev B © Copyright 2020 eSight Corporation All Rights Reserved.
Publication Release May 2020
Introduction
Set the Eye to Eye Distance
Turn on eSight and the Remote
Connect & Register eSight
You’ll need access to a computer or mobile
phone with an internet or Wi-Fi connection to
complete the Wi-Fi and eSight Account setup.
To continue, follow the onboarding on your eSight.
To generate your Wi-Fi QR Code
and Setup your eSight Account
Visit: eSightSetup.com
or scan the QR Code with your
phone to go to the website.
5
Any
Button
Step 2 Remote OnStep 1 eSight On
Turn on eSight. Wait for live video on the screens,
and then turn on the remote.
To Next Page
Need help?
General
