EasyManua.ls Logo

ESKUTE Polluno plus - Specification; Main Parts; Display Operation

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
187*108*65 cm (74*43*26 in)
150*26*84cm (59*10*33 in)
BAFANG G020 Rear Hub Motor, 45Nm
36V 20Ah (Samsung Cell)
720Wh
Shimano 7 gear
Hydraulic Suspension Front Fork
28 x 1.75”
28 x 1.75”
165-195cm
3. Display Operation
2. After turning on the display, press the POWER button once to turn on the light;
3. After turning on the display, press the “+” button to control the assistant level, and each press
increases one level; conversely, press the "-" button to decrease one level.
4. After powering on, press and hold the "-" button for more than 5s to enter 6 km/h cruise.
Booster mode. (At the same time, this operation tests whether the motor can work properly.
Take care to lift the rear wheels.).
5. Press and hold the POWER button and “-” button for 20s at the same time to unbind the
E-bikes from all mobile phones (This function is used when you cannot unbind the E-bikes from
all mobile phones).
+
POWER
-
27kg

Related product manuals