Esoteric K-01 User Manual

10
Identifying the Parts (Main Unit)
A
POWER
Press this button to turn the unit on and off.
The blue indicator lights when the unit is turned on.
B
WORD indicator
Shows word synchronization status.
Blinks when a word clock signal is received.
Lights continuously when a word clock signal is locked.
C
MODE (source select)
When playback is stopped, each time the MODE button is
pressed, the source changes as follows:
CD/SACD
CO
AX (COAXIAL) in
OPT (
OPTICAL) in
USB in
When an external input is selected, the unit can be used as a D/A
converter (page18).
Press and hold this button for more than 2seconds to enter the
setup mode (page20).
D
Remote control sensor
Receives signals from the remote control unit. Point the remote
control unit at this sensor when operating the remote control.
E
Disc tray
C D E J KF GB H IA
F
Display
G
OPEN/CLOSE
Press this button to open or close the disc tray.
H
STOP
Press this button to stop playback.
If you are playing a SACD that allows selectable layer playback,
when playback is stopped, press and hold this button for more
than 2seconds to change the play area of the SACD disc.
In setup mode, press this button to exit setup mode.
I
PLAY
Press this button to start playback.
The indicator ring lights during playback.
J
PAUSE
Press this button to pause playback.
The indicator ring blinks during pause mode.
K
Skip (.//)
Press these buttons to skip forward and backward.
During playback, press and hold these buttons for more than
1second to scan forward and backward.
Repeated pressing and holding of these buttons changes the
scanning speed (page15).
In setup mode, press these buttons to change adjustable settings
(page20).

Esoteric K-01 Specifications

General

Brand	Esoteric
Model	K-01
Category	CD Player
Language	English