espiro YOGA - Stroller Features and Folding; Safety Belt Installation and Adjustment; Stroller Folding Procedures

31. ASSEMBLY OF THE INSERT
Thread the ends of the straps through the holes in the insert. Thread the straps through the
buckles in the seat unit.
Fix the straps using snap fasteners. After assembly, the insert should tightly adhere to
the seat unit.
32. ASSEMBLY AND DISASSEMBLY OF THE RAIN COVER
Mount the rain cover onto the seat unit so it protects the canopy and the footrest
33. GUIDE BAR LENGTH ADJUSTMENT
Press the button on the guide bar (1) and at the same time adjust it to the required
position (2).
34. FOLDING THE STROLLER
Unlock the front wheels.
Press the button of the locking mechanism (1) and turn the folding handle (2).
35. Fold the stroller until the locking mechanism of the stroller is secured in place.
36. CARRYING STRAP
The stroller can be carried using the strap delivered with the set.
NOTE: The strap is equipped with buckles used to disassemble the strap from
the stroller.
37. FOLDING THE STROLLER WITH THE SEAT UNIT
The stroller can be folded with the seat unit assembled facing both sides.
Unlock the front wheels.
Seat unit facing forward
Fold the seat unit forward (1)
38. move the seat unit so that its backrest is located close to the rear wheels (2).
Seat unit facing backward
39. Move the seat unit so that its backrest is located close to the rear wheels (1).