Espressif Systems ESP8266EX - Appendix; 6.1. Schematics of ESP-LAUNCHER Development Board

CONFIDENTIAL
Espressif
Systems
ESP8266EX Beginner’s Guide
4.4. TCP/IP Toolbox
!
Command
Description
Response
Reference
AT+CIPSTATUS
Get connection
status
<id>=connected ID
no. 0-4
<type>=string value,
conection type
“TCP” or “UDP”
<addr>=string value,
IP address
<port>= port no.
<tetype>
0: Connect as client
1: Connect as server
Execute
AT+CIPSTATUS
Back to current
connection mode and
status
+CIPSTATUS:<id>,<type>,
<addr>,<port>,<tetype>
!
OK
AT+CIPSTART
Establish TCP
connection or
register UDP ports
<id>=connected ID
no. 0-4
<type>=string value,
conection type
“TCP” or “UDP”
<addr>=string value,
IP address of remote
server
<port>= port no. of
remote server
Test
AT+CIPSTART=?
1. AT+CIPMUX=0
+CIPSTART:(<type>value
list),(<IP address>range),
(<port>range)
+CIPSTART:(<type>value
list),(<domain
name>range),
(<port>range)
!
OK
!
2. AT+CIPMUX=1
+CIPSTART:(id),
(<type>value list),(<IP
address>range),
(<port>range)
+CIPSTART:(id),
(<type>value list),
(<domain name>range),
(<port>range)
!
OK
! | Page" " September 17, 2014 42