Espressif Systems ESP8266EX - 6.2. Schematics of ESP-LAUNCHER Test Board

CONFIDENTIAL
Espressif
Systems
ESP8266EX Beginner’s Guide
AT+ CIPSERVER
Configure as server
Set
AT
+CIPSERVER=<mode>[,<
port>]
OK
!
Server has to be restarted
<mode>
0: Server mode OFF
1: Server mode ON
<port>: port number,
default value=333
!
Server monitor will
automatically be
created when Server
mode ON.
!
When a client is
connected to the
server, it will take up
one connection.
Server can only be
turned ON when AT
+CIPMUX=1
!
!
!
!
!
!
!
!
!
AT+ CIPMODE
Set module transfer
mode
<mode>
0: No-passthrough
2: Passthrough
Query
AT+CIPMODE?
+CIPMODE:<mode>
!
OK
Set
AT+CIPMODE=<mode>
OK
!
If already connected,
returns
LINK IS BUILDED
Command
Description
Response
Reference
! | Page" " September 17, 2014 46