11
8. Remove the brewer.
9. Wash the brewer with fresh water. Dry the brewer a erwards.
10. Insert back the brewer to its original posi on and install back the
service door its original pos
on.
Note: When
solid icon appears, it indicates that the brewer is
missing / installed improperly. When
ashing icon appears, it
indicates that the service door is missing/ installed improperly.
11. Place the co grounds container on the internal drip tray and insert
back into its original posi
on.
Note: When
is ashing, the co ee grounds container is missing.
12. Place the external drip tray at its original posi on.
13. Unlock the nozzle cover by turning it to le . Then pull it downward to
remove.
To Next Page
Loading...
