Instruction Booklet ESP-2016
12 of 85
Factory Reset Mode
To reset programming to factory
settings:
1. Place a container under the
milk frother (11).
2. Enter Programming mode.
3. Turn the hot water/steam
knob (8) to the ON position.
4. Press the single cup button
(2).
5. The buttons will all flash at the
same time, indicating that all
values have been reset to the
factory default settings.
6. When the single cup button
(2) and the double cup button
(3) flash together, turn the hot
water/steam knob (8) to OFF.
Auto-off Function
This machine is designed to save
energy. Consequently, the
appliance turns off automatically
after 30 minutes of inactivity. To
return to normal operation, simply
press any button.
To Next Page
