35
(Watch runs)
Position 2 - Position for QUICK CHANGE of
Big Date. Rotate crown A clock-
wise until correct digit appears in
each of the two Big Date win-
dows. (Watch continues to run)
NOTE: Extremely rapid winding/advancement
during Quick Change of Big Date can cause a
false date indication. If this happens, the Big
Date function can be resynchronized by
pulling crown A back out to position 2 and
turning it clockwise more slowly, cycling date
from 01 through 31 to correct date.
Position 3 - To set TIME: Rotate crown A in
either direction. (Watch stops)
NOTE: When crown A is in time-setting
crown position 3, hands in second time zone
subdial will move clockwise or counterclock-
wise in sync with hands on main dial. Should
subdial hands become out of sync with main
To Next Page
Loading...
