72
SCREW-DOWN CROWN
Some ESQ sport watches are equipped with
a special screw-down crown that helps seal
the case against water and moisture. Before
attempting to set the time or date, you must
first unlock the screw-down crown by turning
it counterclockwise until it loosens (approxi-
mately six rotations).
After your watch has been set to the correct
time and date (following instructions for
Calendar Models, Figure 2), the crown must
be screwed back down into the case to
ensure water resistance:
1. Return the crown to position 1, flush
against case.
2. Turn the crown clockwise while gently
pressing in on it.
3. Continue to turn the crown until you feel
resistance. Do not over-tighten.
To Next Page
Loading...
