48
To synchronize hands on Chronograph
with Compass Feature:
After a battery change or in the event of an
error, you may need to manually adjust the
chronograph seconds hand to align it correct-
ly at the zero position.
NOTE: Each press and release of button B
will advance the activated hand by one; press
and hold button to advance hand rapidly.
1. Pull crown out to position 3.
2. Push and hold buttons A and B simultane-
ously for at least 2 seconds. Chronograph
seconds hand C will rotate 360 degrees indi-
cating corrective mode is activated.
3. Use push button A to adjust chronograph
seconds hand C.
4. Push button B to switch to hour-counter
adjustment.
To Next Page
Loading...
