Esq SWISS - Page 63

64
Repeat steps 2 through 4 to take any addi-
tional split times.
5. Press button B to stop chronograph; read
final time in digital display.
6. Press button C to reset chronograph to zero.
MODE 4 - DATE SETTING
To set digital date:
1. Press button A until digital display shows
month, date and day fields.
2. Press and hold button C for 2 seconds to
enter date-setting mode.
3. Use button B to select date.
4. Press button C to set date.
5. Use button B to select month.
6. Press button C to set month.
7. Use button B to select day of week.
8. Press button C to set day of week and exit
date-setting mode.