It is important to underline that a customized fade-out effect between two files, whether MIDI or
audio, may be applied to songs present in the same group only, and/or next.
By selecting a second song, the wave form (red) will be shown in the bottom part of the CUE/CUT
window.
Select (by pressing the touch screen) the waveform you would like to operate with (the selected
one will be highlighted by a yellow contour) and by means of the keys ◄ and ►, or the
PAGE/VALUE knob, position yourself on the point of the song you wish to operate with,
remembering, in this case, to use the "PAUSE" key that flashes, in order to perform the song.
To create a customized fade off effect, mark "END" on the "green" song, then "START" on the
"red" song, in the corresponding desired points. Successively press the key and carry out,
by means of the PAGE/VALUE knob, the due corrections at fade off time.
Apply the desired modification and changes , press the "EXIT" key (red) to exit the window. It will
be successively asked to save the changes. Press "YES" to confirm or "NO" to cancel the
operation. It is possible to use the "XFADE" button with its presets, and also the "SYNC" button, if
the time values of both songs are compatible.
Technical Specifications
Input channels sensitivity: Micro -40 dBm balanced (max 0 dBm).
Line -10 pseudo (max 0 dBm).
Input Low Cut filter -12 dB oct. at 100 Hz
Output Master/Monitor 0 dBm Pseudo-balanced .
Connections MIDI IN Only for MIDI Keyboards
OUT One channel at the time (selectable by the user)
Pedal jack Stereo for 3 button pedal
Mono for 1 button pedal
To Next Page
Loading...