What to do if all LEDs are unlit on my Esse-ti Helpy GSM-RM Security System?
If all the LEDs on your Esse-ti Security System are unlit, the HelpyGSM-RM might not be receiving power. Check the power supply to ensure it is properly connected and functioning.
Why is the GSM status LED blinking slowly on my Esse-ti Helpy GSM-RM Security System?
If the GSM status LED (red) on the GSM satellite is blinking slowly, but the GSM signal LED on the HelpyGSM-RM and the green LED on the GSM satellite are unlit, the GSM signal level may be too weak for outgoing calls. Try moving the GSM satellite to a location with better signal reception.
General| Brand | Esse-ti |
|---|---|
| Model | Helpy GSM-RM |
| Category | Security System |
| Language | English |
Instructions for connecting the power supply cable and the backup battery.
Procedures for accessing programming, setting numbers, and recording messages.
Procedures for testing the alarm function and handling incoming calls.
Methods for stopping or resetting an active alarm condition.
Covers accessing programming, setting telephone numbers, date, time, and recording messages.
Details advanced configurations for passwords, alarms, communication modes, and system settings.
To Next Page
