Page 17 CORRECT OPERATION CHECKLIST
CORRECT OPERATION CHECKLIST
1. PROGRAMMING
Access to programming: lift the local telephone handset and dial
.
You will hear the dialling tone (one longer tone followed by a shorter
tone).
Only if GSM200 module is present: dial .
Program a telephone number for the emergency-call alarm:
dial <telephone number> .
Record the identification message of the specific elevator (max. 22
seconds), which is meant to contain all necessary information
concerning the elevator location: dial , pronounce the
message and hang up.
To listen again to the previous message dial: .
Make an external call to check the telephone line presence: dial and
digit the telephone number to make a test call.
2. ALARM PROCEDURE CHECK
Press the emergency button.
The emergency call will be made.
3. ANSWERING AN ALARM
-1
st
mode: handsfree connection by “Handsfree activation” code (factory
default)
Answer by the called party.
The voice messages will be heard.
Press to speak with the trapped person.
-2
nd
mode: automatic handsfree connection
Answer by the called party.
Speak with the trapped person.
Remark: you can choose the 1
st
or the 2
nd
mode with the “Handsfree
connection mode” programming (code 78).
To Next Page
Loading...
