EasyManua.ls Logo

Esse-ti Helpy Oops User Manual

Esse-ti Helpy Oops
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
13/01/2016
GSM/GPRS/GPS TELECARE SYSTEM
User Quick Guide
HELPY OOPS
Question and Answer IconNeed help?

Do you have a question about the Esse-ti Helpy Oops and is the answer not in the manual?

Esse-ti Helpy Oops Specifications

General IconGeneral
Cellular ConnectivityYes
GPS TrackingYes
Fall DetectionYes
Water ResistanceIP67
Battery LifeUp to 7 days
Two-Way Voice CommunicationYes
TypePersonal Emergency Response System
Emergency ContactsUp to 5

Summary

Product Description

Warnings and Precautions

Conformity Declaration

Main Features and Characteristics

Included Accessories

Hardware Description

Device Operation

Opening the Device

Instructions for opening the Helpy Oops device using the provided clip.

SIM Card Installation

Removing Battery Label

Procedure for removing the adhesive label from battery contacts.

Closing the Device

Connecting Accessories

Silicon Protection

How to insert the Helpy Oops into the silicon cover for protection.

Necklace Attachment

Instructions for attaching the strap to the device's dedicated holes.

Clip Attachment

Power On Procedure

Power Off Procedure

Steps to turn the device off by pressing both pushbuttons simultaneously.

LED Status Indicators

Idle Status LEDs

LED indicators for battery status when the device is not active.

Charging Status LEDs

LED indicators showing the battery charging progress.

GSM, Battery, and GPS Status

Alarm and Generic Call Status

Alarm Status

LED behavior during an alarm procedure.

Generic Call Status

LED behavior during a generic call.

Emergency Call Procedure

Call Modes

SMS Alert Mode

SMS and Call Modes

Pre-alarm SMS and Call Mode

Sending an SMS expecting a callback before initiating voice calls.

Generic Call and Reset

Alarm Reset and Call End

Procedure to end a generic call or reset an alarm using Pushbutton 2.

Incoming Calls and Volume

Conversation Volume Adjustment

How to adjust the conversation volume using Pushbutton 2.

Low Battery Notifications

Device Monitoring Features

Room-Monitor Functionality

Enabling listening mode for environmental monitoring purposes.

Location Services

Geofencing Alerts

Notifying when the user enters or exits a predefined geographic area.

Parameter Configuration

PC Software Configuration

Using dedicated software for advanced programming of the device.

SMS Parameter Settings

Password Management

Setting Pushbutton 1 Numbers

Setting Pushbutton 2 Number

Low Battery SMS Alerts

Configuring SMS alerts for low battery status.

Daily Self-Test SMS Activation

Functionality Activation

APN Settings Configuration

Configuring Access Point Name settings for optimal location and cost.

Configuration Management

Deleting All Parameters

Instructions for removing a single configuration or resetting all device parameters.

Remote Status Requests

Requesting Battery Status

How to remotely check the device's battery level.

Requesting Daily Self-Test

Initiating a remote self-test of the device's functionality.

Battery Charging

Product Disposal

Related product manuals