Esse-ti HELPY QUICK-TL INTL - Programming; Basic Programming Settings

Page 19 PROGRAMMING
PROGRAMMING
In the tables below:
 INST indicates that the programming procedure is allowed for the installer;
 OPER indicates that the programming procedure is allowed for the operator;
 factory default values are highlighted in bold.
Basic programming
BASIC PROGRAMMING
ACCESS TO
PROGRAMMING
<INSTALLER or OPERATOR PASSWORD>
(by default: )
EXITING THE
PROGRAMMING
<INSTALLER or OPERATOR PASSWORD>
(by default: )
TYPE OF
TELEPHONE
LINE
(INST)
PSTN line or traditional GSM interface
GSM200 module
TELEPHONE
NUMBERS
(INST)
(position
from 01
to 12)
SOURCE RECEIVER
…
(X…X =
telephone
number,
max 20
digits)
emergency-
call button
ADEMCO
technological
alarms
USER
periodic
test call
ESSE-TI
-
CLI
alarm sent
alert
notification
SMS
(only with
GSM200)
alarm
terminated
alert
notification
P100