PROGRAMMING Page 24
ADVANCED PROGRAMMING
CONNECTION
TIME AFTER
AUTOMATIC
ANSWER
(INST)
(minutes, from 1 to 9)
OFFSET FLOOR
MESSAGES
(INST)
(offset, from 0 to 9)
RELAY SETTINGS
(INST)
same behavior as output AI
same behavior as output AR
active for mains failure
door opener
active as long as the emergency alarm
progresses
active as long as the buttons are pressed
RELAY
INTERMITTENCE
(INST)
steady-state
intermittent (500 ms ON / 500 ms OFF)
DTMF
GENERATOR
SETTINGS WITH
GSM200
(INST)
DTMF generated by GSM network
DTMF generated by autodialer
(DTMF duration = X * 50ms)
READING
GSM200 SIGNAL
LEVEL
(INST)
Listened or read digits Quality
0-12 No signal
13-18 Low signal
19-24 Medium signal
>24 High signal
To Next Page
Loading...
