Essentials BLISS CURVED TOP CRIB 2712 - Mattress Support Height Adjustment

Allen Key #4 (2 pcs)
(Fig.2)
Lowest position
Unscrew b • It and nut using Allen key
(Fig.3)
STEP 2 "MATTRESS SUPPORT HEIGHT ADJUSTMENT"
THIS
STEP REQUIRES:
 -
/I////I////////I///.
Bolt 3/4"(20 mm.) (4 pcs)
Jcn Nut 3/4"(20 mm.) (4 pcs)
©
Lock Washer (4 pcs)
Bracket (4 pcs)
- Move all 4 support bracket to the lowest position as shown in Fig.2.
- Attach lock washer, allen bolt and Jcn nut 3/4" (20 mm.) to bracket as shown.
Final position as shown in Fig.3.