4 - Essentials Pro 2
OPERATION
Attaching Handpiece
Fixed 4-hole
1. Align tubes on handpiece with holes in delivery system tubing (Fig. 1).
2. Thread tubing nut to bottom of handpiece and finger tighten (Fig. 2).
Swivel Coupler
1. Align Tubes on coupler with holes in delivery system tubing (Fig 3).
2. Thread tubing nut to bottom of coupler and finger tighten (Fig 4).
3. Pull back coupler ring and slide handpiece onto coupler. Release ring to secure.
Removing Handpiece
Fixed 4-hole
1. Unscrew tubing nut from bottom of handpiece (Fig. 2).
Note: Do not hold or pull on hose.
Swivel Coupler
1. Pull back on coupler ring.
2. Pull handpiece straight off.
Note: Do not hold or pull on hose.
Fig. 1
Fig. 2
Fig. 3
Fig. 4Coupler Ring
To Next Page
Loading...