Essentials Smart Garden Soil Moisture Sensor - Auto Running

5 Setting
1. After finishing connection, press and hold both buttons at the sensor for 5
seconds, user can wake up the program, the LED light will show the current Soil
moisture level. 5 LED lights indicate 5 levels of soil moisture levels: 20 %,
40 %, 60 % 80 % and 100 % (Volume Water Content)
2. When wake up the LED light, press the Left button, user can set the “Stop Water-
ing Soil Moisture Level”, default is at 60%. After setting, press Right button or
wait for 20 seconds to confirm.
3. When wake up the LED light, press the Right button, user can check the current
soil moisture level. (User can view the accurate data through our App)
6 Auto running
After setting the “Stop Watering Soil Moisture Level” and pairing successfully, the
water timer will automatically stop watering plan once the Soil moisture reach the
setting level.
5