This document describes the Essentiel B ERSC-4262b Space Heater, a versatile heating appliance designed for well-insulated rooms.
Function Description
The Essentiel B ERSC-4262b is a space heater with multiple functionalities to provide comfortable and efficient heating. It offers both manual and electronic control over its thermal output and room temperature. Key features include:
- Heating Modes: It provides two main heating powers (1300 W and 2000 W) and an Eco mode for automatic power selection based on ambient temperature. An anti-freeze mode maintains a minimum room temperature of 7°C.
- Temperature Control: An electronic thermostat allows users to set desired temperatures between 15°C and 35°C.
- Oscillation Function: The heater can oscillate up to 80° to distribute warm air evenly across the room.
- Timer Functions: It includes a 24-hour timer for both delayed start and delayed shutdown, offering flexibility in operation.
- Digital Display: A digital display shows current settings, temperature, and timer countdowns.
- Remote Control: The device comes with a remote control that mirrors all functions available on the control panel, enhancing user convenience.
- Safety Features: Equipped with a tip-over safety feature that automatically switches the device to standby if it falls, and a protection function that activates if the temperature becomes abnormally high (above 55°C) or if the air outlet is obstructed.
- Memory Function: The heater retains its last settings in case of a power cut, ensuring continuity of operation once power is restored (unless the main switch is off or the device is unplugged).
- Automatic Standby: The device automatically enters standby mode after 12 hours of continuous operation without any setting changes or programmed shutdown.
Important Technical Specifications
- Model Number: 8009997_Space Heater Essentiel B ERSC-4262b
- Supply Voltage: 220-240 V~
- Mains Frequency: 50/60 Hz
- Heating Powers: 1300 W and 2000 W
- Electronic Thermostat Range: 15°C to 35°C
- Timer: 24 hours (delayed start and shutdown)
- Oscillation Angle: Approximately 80°
- Power Cord Length: 1.6 m
- Weight: 2.8 kg
- Dimensions (L x D x H): 23.2 x 18.7 x 65.8 cm
- Recommended Room Size: Up to 20 m²
- Auxiliary Power Consumption (Standby): 0.00021 kW
- Remote Control Battery: 1 x CR2032 3V battery (included)
- Compatibility: Not suitable for bathrooms.
Usage Features
The space heater is designed for straightforward operation:
- Placement: Position the device on a flat, stable surface.
- Initial Setup: Ensure the main switch (9) at the rear is in the "0" (off) position before plugging the power cord (6) into a mains socket.
- Power On: Flip the main switch (9) to "1" (on). The device will emit two beeps, and the screen will display "--", indicating standby mode.
- Activate Heating: Press the on/standby mode button (10). A beep will sound, and the device will activate at low power, indicated by the (19) light on the control panel. For first-time use or after unplugging, it starts at low power and 35°C.
- Oscillation: Press the oscillation button (16) to activate or deactivate the 80° oscillation function. The (20) light will appear on the control panel when active.
- Power Selection / Anti-freeze Mode: Use the power selection/anti-freeze mode button (11) to cycle through low power (19 light), high power (18 light), and anti-freeze mode (17 light). In anti-freeze mode, the device maintains the room temperature at 7°C.
- Temperature Adjustment / Eco Mode:
- Temperature Setting: Press the temperature adjustment button (13) once. The display (12) will flash. Use the + (25) and - (24) buttons to set the desired temperature (15-35°C) within 3 seconds. The setting is saved automatically.
- Eco Mode: Press the temperature adjustment button (13) a second time to activate Eco mode. The ECO (22) light will appear. In Eco mode, the device automatically selects high heating power (if ambient temperature is ≤ 18°C), low heating power (if ambient temperature is between 18°C and 25°C), or switches to standby (if ambient temperature is > 25°C).
- Screen Light On/Off: Press the screen light button (15) to turn the display backlight on or off.
- Delayed Shutdown: Press the timer control button (22). The "h" (14) light will appear, and the display (19) will flash. Use the + (25) and - (24) buttons to set a shutdown duration from 1 to 24 hours within 3 seconds. The device will automatically turn off after the set time.
- Delayed Start: With the device in standby (after turning it on with button 10), press the timer control button (22). The "h" (14) light will appear, and the display (19) will flash. Set the desired start delay (1-24 hours) using + (25) and - (24). The device will start automatically after the set time.
- End of Use: Press the on/standby mode button (10) to stop heating and oscillation. The internal fan will continue to run for 30 seconds to cool the device, with a countdown on the control panel. After 30 seconds, the device enters standby mode ("--"). Then, turn the main switch (9) to "0" (off) and unplug the device.
Maintenance Features
Regular cleaning and filter maintenance are crucial for optimal performance and longevity of the device.
-
General Cleaning:
- Always unplug the power cord and allow the device to cool completely before cleaning.
- Never immerse the appliance in water or any other liquid.
- Wipe external surfaces with a soft, slightly damp cloth to remove dust and dirt. Avoid abrasive cleaning products (alcohol, solvents, etc.).
- Use a vacuum cleaner to remove dust from the grilles.
- Ensure the device is completely dry before plugging it back in.
- For prolonged non-use, turn off, unplug, and store the device in a clean, dry place.
-
Filter Maintenance:
- Removal: Remove the rear protective cover by using the designated notches. This will provide access to the dust filter located behind the cover.
- Cleaning: Vacuum any dirt from the filter and cover. If necessary, rinse the filter and cover with clean water.
- Reinstallation: Ensure the filter and cover are completely dry. Position the filter behind the protective cover by sliding it under the retaining notches. Then, clip the protective cover back onto the device, ensuring it fits into the designated notches.
This comprehensive description covers the essential aspects of the Essentiel B ERSC-4262b Space Heater, from its operational features to its maintenance requirements, ensuring users can effectively and safely utilize the appliance.
Need help?
General
To Next Page