What to do if the 'water collection tank full' symbol is on in my essentiel b Washer?
If the 'water collection tank full' symbol is illuminated or flashing on your essentiel b Washer, it means that the water collection tank is full and needs to be emptied. Also, if your appliance is connected directly to a drain hose, ensure that there is no kink in the drain hose.
Why is the drying process excessively long in my essentiel b Washer?
An excessively long drying process in your essentiel b Washer can be due to several reasons: * The filters (lint filter, condenser foam filter) might be clogged, so check their condition. * The ventilation grille at the front of the appliance might be blocked; remove any obstructions. * The room where the appliance is located might be too small, causing insufficient ventilation; open the door or window. * Limescale might have formed on the moisture sensors; clean them. * The dryer might be overloaded; adhere to the maximum capacities in the programme table. * The laundry might not have been spun well; spin it at a higher speed.
What to do if the programme stopped for no reason on my essentiel b Washer?
If the programme on your essentiel b Washer stops unexpectedly, it could be due to a few reasons. First, ensure that the door is properly closed. Second, if there was a power outage, press the “Start/pause” button to restart the programme. Finally, the water collection tank might be full; empty it when the symbol appears on the display.
What to do if my laundry is wet after drying in my essentiel b Washer?
If your laundry is still wet after the drying cycle in your essentiel b Washer, consider these possibilities: * The selected programme may not have been suitable for the type of laundry. Check the labels on the clothing and choose a programme according to the laundry type, supplementing with a timed programme if needed. * The filters (lint filter, condenser foam filter) might be clogged; check them. * You may have overloaded the dryer; observe the maximum capacities indicated in the programme table.
What does it mean when the lint filter cleaning symbol is lit on my essentiel b Washer?
If the lint filter cleaning symbol is lit on your essentiel b Washer, it indicates that the filter is clogged with lint. Clean the filter to resolve this issue.
General| Brand | essentiel b |
|---|---|
| Model | ESLHP8-2b |
| Category | Washer |
| Language | English |
To Next Page
