Essentielb ELT 813-1b User Manual

34

Press the START/PAUSE button to start
the selected cycle.
 Once a programme is selected the
programme selector remains stationary on
the selected programme till cycle ends.
 "End" will appear in the display at the
end of the program and the DOOR
LOCKED light will go off, it is now
possible to open the door.
 Switch off the washing machine by
turning the selector to OFF.
 Press to start the selected cycle.
ADD OR REMOVE ITEMS AFTER THE
PROGRAMMES HAS STARTED (PAUSE)
 Press and hold the START/PAUSE
button for about 2 seconds (some
indicator light and the time remaining
indicator will flash, showing that the
machine has been paused).
 Wait until the DOOR LOCKED light has
gone out before opening the door.
 After you have added or removed items,
close the door and press the
START/PAUSE button (the programme
will start from where it left off).
CANCELLING THE PROGRAMME
 To cancel the programme, set the
selector to the OFF position.
 Wait 2 minutes until the safety device
unlocks the door.
 This button allows you to pre-programme
the wash cycle to delay the start of the
cycle for up to 24 hours.
DELAY START button
Before you open the door, please
check water level is below the door
opening to avoid flooding.
When the START/PAUSE button has
been pressed, the appliance can take
few seconds before it starts working.
Close the door BEFORE selecting the
button START/PAUSE.
START/PAUSE button
The programme selector must be
returned to the OFF positi
on at the end
of each cycle or when starting a
subsequent wash cycle prior to the next
programme being selected and started.
When the programme selector is turned
the display lights up to show the settings
for the programme selected.
For energy saving, at the end of the
cycle or with an inactivity period, the
display level contrast will decrease.
N.B.: To switch the machine off, turn
the programme selector to the OFF
position.
PROGRAMME selector with OFF
position
WARNING:
Don’t touch the display while inserting
the plug because the machines
calibrates
the systems during the first
seconds: touching the display, the
machine couldn’t work property. In
this case, remove the plug and repeat
the operation.

Essentielb ELT 813-1b Specifications

General

Brand	Essentielb
Model	ELT 813-1b
Category	Washer
Language	English