Essentielb ELT 813-1b User Manual

36
 If you want carry out a cold wash all the
indicators must be off.
 By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
 If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
 To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
 It is possible to modify the spin speed
without pausing the machine.
(only available on certain models)
 This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
 During the phase in which the water is
held in the tub, the relevant indicator light
blink to show that the machine is at a
standstill.
 Deselect the option to end the cycle with
a spin dry (which may be reduced or
cancelled using the appropriate button)
and emptying phase.
 Thanks to electronic control, the water in
the intermediate phases is emptied
silently, making this option very useful for
washing at night.
 Pressing simultaneously the buttons
TEMPERATURE SELECTION and SPIN
SPEED for about 3 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making
accidental or unwanted changes if a
button on the display is pressed
accidently during a cycle.
 The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
1) DOOR LOCKED INDICATOR LIGHT
 The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
START/PAUSE button.
Digital Display
KEY LOCK
NIGHT WASH button
The machine is fitted with a special
electronic device, which prevents the
spin cycle without load or on
particularly unbalanced load.
This
reduces the noise and vibration in
the
machine and so prolongs the life of
your machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
SPIN SPEED button

Essentielb ELT 813-1b Specifications

General

Brand	Essentielb
Model	ELT 813-1b
Category	Washer
Language	English