Why is the Esta Vacuum Cleaner motor's current consumption too high?
If the motor's current consumption is too high, it might be due to an incorrect rotation direction. To resolve this, switch two phases to change the direction of rotation.
What to do if the desired air mass is not achieved with my Esta Vacuum Cleaner?
If you're not achieving the desired air mass, the motor's rotation direction might be incorrect. Try switching two phases to change the rotation direction.
What to do if the fuse on the supply line triggers in Esta Vacuum Cleaner?
If the fuse on the supply line triggers, it could be due to turning the motor on and off too frequently in short intervals. Please comply with the “Switch-on operations for motors” chart.
How to fix motor assembly shut off before reaching operating RPM in Esta Vacuum Cleaner?
If the motor assembly shuts off before reaching operating RPM, it could be due to wrong or poorly installed switching devices, or the time for star/triangle start-up being incorrectly set. You should install the switching devices correctly or allow for heavy starting. Also, check the time relay and reset it if necessary.
General| Brand | Esta |
|---|---|
| Model | MOBEX P-24 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
