PAS Level
Press UP or DOWN buttons to change the PAS level. PAS levels are 1-5. PAS level 0 offers no power assist.
The default level is level 1.
Level 1 Level 3
Battery Indication
When the battery is full, all five segments of the battery will be illuminated. When the battery is critically
low, the battery will have no segments and will flash.
Full Low power Empty
USB Charging
There is a USB port on the underside of the display which can be used for charging mobile phones and other
electronics. The standard output voltage is 5V with a max current of 500mA.
The USB port will continue to function even when your estarli is powered off. While charging the red led at
the bottom of the screen will flash. While powered on press the M and D buttons to enable charging mode.
To Next Page
Loading...
