ESTeem One-Piece Pouch User Manual

Esteem
™
+ One-Piece Pouch with
ConvaTec Moldable Technology
™
4
Moldable disc & pouch come attached.
4
Remove moldable disc from the pouch. Remove liner marked #1. This is
the molding side.
Roll and mold the disc to the size of the
stoma. Do not stretch, pull or cut. Pinch
into place once desired size is reached.
Check the size of the molding. Remove liner marked #2.
This side will go on the skin.
Place the disk on the body. Push the roll
of adhesive toward the stoma to ensure
a close fit. Skin should be clean and dry.
Remove liner marked #3. Separate the sides of the
pouch to allow some air to
enter the pouch.
Place pouch on the moldable disc Smooth/hold skin barrier in place
for about 30 seconds.
Moldable Disc application
1
Remove pouch release liner.
Applying pouch to the Moldable Disc
2
Refer to package insert for complete instructions.

ESTeem One-Piece Pouch Specifications

General

Brand	ESTeem
Model	One-Piece Pouch
Category	Personal Care Products
Language	English

Summary

Moldable Disc Application and Attachment

Prepare Moldable Disc

Remove disc from pouch, identify molding side, and shape to stoma without stretching or cutting.

Apply Disc to Skin

Place disc on clean, dry skin, ensuring a close fit by pushing adhesive towards the stoma.

Attach Pouch to Disc

Remove pouch release liner and place pouch onto the moldable disc, securing the skin barrier.

Pouch Tail Closure and Maintenance

Secure Pouch Tail

Close the pouch tail by folding it three times and securing the interlocking closures.

Empty Drainable Pouch

Empty the pouch by tilting the tail up, opening the closure, and unraveling it.

Remove Pouch and Disc

Remove the entire pouch and disc unit when it's time for a change.