Factory Reset eSelect M
1. From main screen press the OK button and using
the right arrow button scroll until Select Menu
SETTINGS is shown
2. Press the OK button followed by the right arrow
and scroll until Factory Settings is shown (see image).
3. Press OK button to highlight the word NO followed
by the right arrow button until NO changes to the
word RESTORE and press the OK button to confirm
4. The word CONFIRM should now be shown with NO
below it. Press the right arrow to change NO to YES
and confirm by pressing the OK button.
4. When the instrument restarts you will have to
confirm all the default settings such as time, date,
language as well as pH, Rx, CL for however many
channels you have.
To Next Page
Loading...
Need help?
General
