How to Use Each Function
6. Select the presence or absence of thermal function
The thermal function is set as “On” upon shipment and the tem-
perature is adjusted to about 40℃.
The thermal function of the abdomen pad (or Kegel pad) can be
turned o.
It is operated at one time on the above two pads.
When you want to adjust the use time, touch the button, and then
numbers icker and change by the units of 5 min.
(Example: 30→35→40→45→50→55→60→5→15→20→25→30)
The product is set as 30 min all the time. When you use several
pads at the same time, the time is unied as the one rst set.
7. Time Setting
You can pause during use, and the pause button ickers till you
press the pause/restart button again.
"The product automatically powers off with the sound of a buzzer
if you do not touch it again for 20 minutes.”
8. Pause / Play
9. Power O
If you touch the power button during operation, the power
turns o with a sound.
10. Select the Ultrasound Probe
Select the Ultrasound Probe
If you touch the button, the ultrasound button works immediately,
and this is indicated on the display.
The ultrasound probe is set to work for 15 minutes.
You should keep moving the ultrasound probe continuously to
prevent it from treating one part intensively.
The use time of the ultrasound probe cannot be adjusted.
5. How to Use
To Next Page
Loading...