EasyManuals Logo

ETC REsponse Setup Instruction

ETC REsponse
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ETC Setup Guide
Response MIDI Gateway
Corporate Headquarters
Middleton, WI, USA
Tel +608 831 4116
Service: (Americas) service@etcconnect.com
London, UK
Tel +44 (0)20 8896 1000
Service: (UK)
service@etceurope.com
Rome, IT
Tel +39 (06) 32 111 683
Service: (UK) service@etceurope.com
Holzkirchen, DE
Tel +49 (80 24) 47 00-0
Service: (DE) techserv-hoki@etcconnect.com
Hong Kong
Tel +852 2799 1220
Service: (Asia) service@etcasia.com
Web: etcconnect.com
© 2018 Electronic Theatre Controls, Inc.
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
4267M2240
Rev A
Released 2018-05
Overview
The Response MIDI Gateway supports sending and receiving MIDI (Musical Instrument Digital Interface)
control signals. MIDI enables various types of equipment to communicate, control and synchronize with
each other through the transmission of digital data. For MIDI output the signal is generated by the
controlling device and transmitted to the MIDI Gateway over USB or an Ethernet network to be output
locally at the gateway. The gateway itself does not generate MIDI messages.
MIDI Connections
The following connections are available:
MIDI In - allows communication from a MIDI device to a Net3 controller, ACN controller or USB MIDI
receiver through the gateway. The input accepts MIDI notes, MIDI Show Control packets and MIDI
Time Code.
MIDI Thru - allows communication between multiple MIDI devices by passing the input through the
gateway and back out to another MIDI device.
MIDI Out - allows communication with a MIDI device from a Net3, ACN or USB control source through
the gateway. Outputs MIDI notes, MIDI Show Control packets and/or MIDI Time Code.
The pinouts for the MIDI connections are as follows:
LED Indicators
Power - solid blue indicates that power is supplied
Ethernet - solid green indicates network connection and blinking indicates network activity
USB - solid green indicates USB connection and solid red indicates connection without having fully
detected, identified and loaded device drivers
MIDI Out port
MIDI Thru port
MIDI In port
Navigation buttons
LED indicators
3
1
5
2
4
3
1
5
2
4
3
1
5
2
4
N/C
Thru+
N/C
Thru-
Shield
N/C
In+
N/C
In-
N/C
N/C
Out+
N/C
Out-
Shield
MIDI In MIDI OutMIDI Thru

Other manuals for ETC REsponse

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ETC REsponse and is the answer not in the manual?

ETC REsponse Specifications

General IconGeneral
BrandETC
ModelREsponse
CategoryGateway
LanguageEnglish