ETC WR6161K-84 - User Manual

ETC Installation Guide
Feedthrough Relay Panel Relay Kit
Corporate Headquarters  Middleton, WI, USA | +1 608 831 4116
Global Offices
 London, UK | Rome, IT | Holzkirchen, DE | Paris, FR | Hong Kong | Dubai, UAE | Singapore
New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX
Web etcconnect.com | Support support.etcconnect.com | Contact etcconnect.com/contactETC
© 2021 Electronic Theatre Controls, Inc. | Trademark and patent info: etcconnect.com/ip
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7023M2220 Rev E Released 2021-12
Overview
The Feedthrough Relay Panel Relay Kit is designed for use in the Unison Echo Relay Panel Feedthrough
(ERP-FT). This kit includes a relay and a wiring harness for low voltage connection to the relay control board.
Relay Specification
WR6161K-84 Single Pole HID Relay
ERPFT-1PRK: single pole, single space
20 A HID relay kit
ERPFT-2PRK: double pole, single
space 20 A HID relay kit
ERPFT-480V: double pole, double
space 20 A HID relay kit
Note:
The Feedthrough Relay Panel Relay Kit is compatible with legacy SmartSwitch Relay
Panels.
CSA UL Listed
General Use 20 A @ 347 VAC General Use 30A @ 300VAC
Ballast (Standard) 20 A @ 347 VAC
Ballast (Standard)
Ballast (Electronic)
20 A @ 300 VAC
16 A @ 277 VAC
Tungsten 2400 W @ 120 VAC Tungsten 2400 W @ 120 VAC
Motor Load
1/2 HP @ 110–125 VAC
Motor Load
1/2 HP @ 110–125 VAC
1-1/2 HP @ 220–250 VAC 1-1/2 HP @ 220–277 VAC
Short Circuit Rating 18,000 A 277 VAC
1
2
WR6161K-84
1 -
P
OL
E RE
LAY
WR6166-84
2 - POLE RELAY
1
2
1
2
WR6172-84
2 -
P
OLE RELAY

Summary

Overview

ERPFT-1 PRK Relay Kit

Details for the single pole, single space 20 A HID relay kit.

ERPFT-2 PRK Relay Kit

Details for the double pole, single space 20 A HID relay kit.

ERPFT-480 V Relay Kit

Details for the double pole, double space 20 A HID relay kit.

Relay Specification

WR6161 K-84 Single Pole HID Relay Specifications

Technical specifications for the WR6161K-84 Single Pole HID Relay under CSA and UL listings.

WR6166-84 Double Pole HID Relay Specifications

Technical specifications for the WR6166-84 Double Pole HID Relay under CSA and UL listings.

WR6172-84 Double Pole 480 V HID Relay Specifications

Technical specifications for the WR6172-84 Double Pole 480V HID Relay under CSA and UL listings.

Relay Ratings

Installation Procedure

Remove Cover Assembly

Step 1: Remove the front cover assembly from the Relay Panel to access the interior.

Pull Line Feeds

Step 2: Pull line feeds through conduit from the circuit panel to the Relay Panel.

Pull Load Wires

Step 3: Pull load wires through conduit from the Relay Panel to the lighting loads.

Prepare Relay Slot

Step 4: Remove one slot from the relay voltage barrier if installing a single relay.

Install Relay

Step 5: Install the relay into the selected relay slot, aligning terminals.

Connect Relay Wiring Harness

Step 6 & 7: Connect the keyed two-pin connector and wire leads of the relay harness.

Connect Line and Load Wires

Step 8: Strip and connect line and load copper wires to the relay output screw terminals.

Verify Installation

Power Up

ETC WR6161K-84 Specifications

General

Contact Arrangement	DPDT
Contact Form	2 Form C
Coil Voltage	24VDC
Ambient Temperature	-40°C to +70°C
Relay Type	General Purpose
Contact Rating	10A 250VAC/30VDC
Coil Power Consumption	0.9W
Release Time	5ms max
Mechanical Life	10, 000, 000 operations
Insulation Resistance	1000MΩ min
Electrical Life	100, 000 operations at rated load