Etec EKEPC3 - Step 9: Complete Configuration and Restart

21
Ifnecessary,pleaseupdate
thefirmware,enterthe
URLhere,thenclickthe
buttonontheleft,the
devicewilldownloadthe
firmwareautomatically.
Pleasebeaware,ifthe
deviceisoncharging,the
uploadwillstart
automaticallyafterthe
chargingends.Itwill
restartthedevicewhenthe
uploadsucceeds.
E.g:http://tb1.tpddns.cn:
6002/binFile/OCPP_en.bin
Ifyouforgetit,please
contacttothemanufacturer.
Iftheparametersare
completed,pleaseclickthis
button.
Step9:Completetheconfigurationthenclickthisbutton,thedevice
willsavethealldatasandrestartitself.