Need help?Do you have a question about the ETEKCITY Lasergrip 1030D and is the answer not in the manual?
Warnings and precautions for Class 2 laser radiation use, avoiding direct exposure and optical instruments.
Guidelines on device operation, battery use, keeping bystanders aware, and avoiding disassembly.
Care for the lens, avoiding electromagnetic fields, and heat sources during operation.
Explains surface temperature measurement and its limitations, including for body temperature.
Identifies and describes the main external parts of the infrared thermometer.
Step-by-step guide to inserting the 9V battery correctly into the compartment.
How to point the device and use the trigger to take temperature readings.
Instructions for continuous scanning and the device's auto-off feature after inactivity.
Important notes on measurement limitations and display indicators for out-of-range temperatures.
How to set reference values and adjust temperature ranges using buttons.
Explains how screen colors (blue/red) indicate temperature relative to set ranges.
Steps to turn off the temperature filter function using the arrow buttons.
Explains emissivity's effect on thermal energy and measurement accuracy.
Tips for accurate measurements on different surfaces, including using tape or paint.
Explains how distance affects the measured area and the 12:1 ratio.
How to ensure the target area is twice the spot size for best results.
Instructions for cleaning the lens, body, and case using appropriate materials.
Important notes on what not to use for cleaning the lens or unit.
Notification of low battery and the importance of immediate replacement.
Steps for replacing the battery, including proper disposal and polarity.
Key technical details including measurement range, accuracy, response time, and emissivity.
Statement regarding compliance with FCC Part 15 rules and conditions for operation.
Recommendations for users if the equipment causes radio or television interference.
Fields to record product name, model, order ID, and date of purchase.
Details of the 2-year warranty, coverage, exclusions, and limitations.
Conditions and actions that void the product warranty.
Provides Etekcity Corporation's address, toll-free number, and email for support.
Specifies the operating hours for customer support services.
Advises users to have invoice and order ID ready before contacting support.
General| Distance to Spot Ratio | 12:1 |
|---|---|
| Display | LCD |
| Power Source | 9V battery |
| Wavelength | 5-14μm |
| Battery Type | 9V |
| Backlit Display | Yes |
| Temperature Range | -58°F to 1022°F (-50°C to 550°C) |
| Response Time | 500ms |
| Emissivity | 0.1~1.0 (Adjustable) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Display Resolution | 0.1°C/°F |
| Auto Shut-off | Yes |
| Laser Pointer | Single laser |
To Next Page
