10
2.2 SETTING THE TIME
CROWN 6 PULLED OUT TO POSITION C
To set the time, pull the crown 6 out two notches to posi-
tion C. Turn it in either direction to position the hands
to the desired time. When the hour hand passes the
12 o'clock position, you will see whether it is indicating
midnight (the date changes) or midday (the date does
not change). Check that the date set previously has not
changed. Once the setting is complete, push the crown
back in against the case to the rest position A. The hands
will restart.
NOTE
For a time setting accurate to the second, we
recommend pulling the crown out to position C
when the central seconds hand 3 is at precisely 12
o'clock, and pushing it back in to synchronise with
an ocial time signal.
2.3 RAPID WEEKDAY CORRECTION
CROWN
6
PULLED OUT TO INTERMEDIATE POSITION
B
Pull the crown
6
out one notch to position
B
. Turn it anti-
clockwise until the correct day appears in the window
5
.
Then push the crown
6
back in against the case to the rest
position
A
.
ENGLISH
10
To Next Page
Loading...
