11
2.4 RAPID DATE CORRECTION
CROWN
6
PULLED OUT TO POSITION
B
Pull the crown
6
out one notch to position
B
. Turn it clockwise
until the correct date appears in the window
4
. Then push the
crown
6
back in against the case to the rest position
A
.
NOTE
During this operation your watch continues to run
normally, hence the time does not need to be corrected.
IMPORTANT
Never correct the date between 10:00 p.m. and 12:00
a.m. The movement is in the date change process,
and could be damaged.
ENGLISH
11
To Next Page
Loading...
