2. –
2.1 Screw-in setting crown
To ensure optimum water resistance,
your watch has a screw-in setting
crown which is operated as follows:
To enable watch winding and settings, you first need to
release the screw-in crown
5
. To do so, undo the crown
a few turns anti-clockwise. Once winding or setting is
complete, push the crown back in against the case, and
screw it back in fully. Never operate the crown underwa-
ter or when it is still wet.
The crown
5
has 3 positions:
A
Rest and manual winding position
B
Rapid date correction position
C
Time-setting position with stop seconds and date
change at midnight
To Next Page
Loading...
