Eternal Lighting CUBE5 - Wireless Transmitter Setup and Communication; ID Code and LED Color Mapping; Selecting Transmitter Groups; Wireless Communication Setup Steps

10
Compatible series product as follows:
Wiresless transmitter
Operating manual：
1. ID code and LED color corresponding relationship：
 1：RED
 2：GREEN
 3：RED+GREED
 4：BLUE
 5：RED+BLUE
 6：GREEN+BLUE
 7：RED+GREED+BLUE
2. Press button on transmitter to select group to match corresponding color on the
receiving fixture.
 LED constant lit up：no DMX or wireless signal.
 Red LED flash：transmitting.
 Green LED flash：receiving
3. RF frequency- - - - - - - - - - - - 2. 400-2. 525 Ghz，total 126 channels，it’s searching
automatically,
Establishing Communication：
1. Power on DMX512 wireless received board and transmitted board.
2. Press button to set same color of transmitted board and received board., please