Need help?Do you have a question about the ETERNITY G26 and is the answer not in the manual?
Lists regulations and instructions for unit installation, including building codes.
Emphasizes that installation must be performed by licensed and authorized persons.
Procedures for inspecting the unit upon delivery for damage or discrepancies.
Illustrates physical dimensions and connection points for Model 16/20.
Illustrates physical dimensions and connection points for Model 26.
Lists and identifies components for the Model 16/20.
Lists and identifies components for the Model 26.
Details technical specifications like gas consumption, pressure, and capacity.
Information regarding the location and purpose of the appliance's data plate.
Important notes on the correct gas type for operation and warnings.
Specifies the physical depth, width, and height of the unit.
Highlights the location and importance of warning labels on the unit.
Details approved installation locations and clearance requirements.
Information on secure mounting methods for the unit.
Steps for fitting unions and isolating gas cocks for safety.
Ensuring adequate capacity for gas supply and regulators.
Guidelines for pipe sizing to achieve optimal performance.
Minimum pipe sizes and sizing according to local bylaws.
Mandates gate or ball valves, prohibits stop taps.
Conditions that void warranty; note on pressure reduction valves.
Specifies outlet connection size and need for an isolating union.
Importance of pipe length and insulation for performance.
Prohibits valves/restrictions at outlet and obstructions to pressure relief.
Instructions for cleaning the water inlet strainer.
Details the required plug and power supply specifications.
Requirement for a weatherproof outlet near the appliance.
Emphasizes disconnecting power before maintenance.
Overview of available remote control models and systems.
Guidance on suitable and unsuitable placement of remote controls.
Procedures for connecting and testing remote controls.
How to turn on, set temperature, and use main/shower controls.
Illustrates wiring connections on the Printed Circuit Board (PCB).
Diagram showing connections from the main unit to remote controls.
Identifies controls and indicators on the CMR-154 main remote.
Explains the purpose of each control and indicator on the main remote.
Identifies controls and indicators on the YST-84/84S remotes.
Explains the purpose of each control and indicator on these remotes.
Lists components included for mounting main remote controls.
Lists components included for mounting shower/sub remote controls.
Step-by-step guide for mounting using the provided bracket.
Instructions for direct wall mounting of the remote controls.
Overview of the unit and its remote control capabilities.
Step-by-step guide for operating the main remote control.
Guide on how to operate the shower and sub remote controls.
Suggested temperature settings for different uses and safety.
Guidance on leaving the main remote on and adjusting temperature.
Warnings about placement, flammables, and flue outlet.
Procedures for handling gas smells and leaks.
Explains behavior during power outages and remote reset.
Strict warning against indoor installation due to safety risks.
Guidance on detecting gas leaks and confirming gas/power types.
Advise to check water temperature before showering.
Procedure for emergencies like earthquake, fire, or gas leaks.
Warnings about wet hands, proper plug insertion, and cord usage.
Cautions against water on remotes and near electric appliances.
Measures for lightning and ensuring space for servicing.
How to interpret error codes displayed on the remote for faults.
Table of common problems, error codes, and suggested remedies.
Importance of regular 12-monthly maintenance for longevity and safety.
Mandates licensed installers and authorized personnel for installation and service.
Circumstances under which the warranty becomes void.
Specific faults and damages not covered by the warranty.
Specifies warranty periods for parts and labor for domestic and commercial use.
Clarifies definitions for domestic and commercial use.
To Next Page
General