Need help?Do you have a question about the ETERNITY G20 and is the answer not in the manual?
Comprehensive technical specifications and dimensional details for the Eternity hot water units.
Details regarding the unit's data plate location and content.
Information on the approved gas types for the appliance and operational restrictions.
Specific measurements for heater depth, width, and height for different models.
Information on the location and importance of warning labels on the unit.
Recommended placement and clearance requirements for installing the hot water unit.
Guidance on the fixing methods and support required for unit installation.
Overview of available remote control systems and their corresponding model numbers.
Recommendations for installing remote controls in suitable locations, avoiding hazards.
Instructions for fitting the main remote control using mounting holes and wiring.
Guidance on mounting shower and sub-remote controls using adhesive backing plates.
Steps for connecting remote control wiring to the main unit via conduit or wall cavity.
Procedure for turning on, testing, and operating the remote controls after installation.
Welcome and overview of the Eternity hot water unit's features and benefits.
Step-by-step guide on how to use the main remote control for temperature selection and operation.
Critical advice on installation, gas leaks, and power supply confirmation for safe operation.
Warning and advice on checking water temperature to prevent burns from hot water.
Specifies warranty coverage for parts and labour for domestic use of the appliance.
Outlines the warranty terms for commercial installations and usage of the unit.
Clarifies what constitutes domestic use for warranty purposes.
Defines the scope and applications considered commercial for warranty purposes.
To Next Page
General