Etesia ET MOWER ETM105

Questions and Answers

P
phillipskellyAug 19, 2025
What to do if my Etesia ET MOWER ETM105 shows a 'Wheel' alarm?
- K
  Kaitlin JacksonAug 19, 2025
  If your Etesia Lawn Mower displays the 'Wheel' alarm, it means there may be a problem with the wheel. First, check if the wheel is blocked by any object and remove it. If the issue persists, it could be due to a faulty motor, in which case you should consult your dealer. Alternatively, the 10A fuse of one of the wheel motors might have burnt out. To check this, turn the machine off, open the metal case, and inspect the 10A fuse, replacing it if necessary.
S
Sarah PooleAug 21, 2025
What to do if my Etesia ET MOWER ETM105 Lawn Mower shows a 'Head' alarm?
- O
  oneillsamanthaAug 21, 2025
  If your Etesia Lawn Mower displays the 'Head' alarm, it indicates an issue with the cutting head. This could be due to grass clippings clogging the cutting head, so clean the cutting head in question. Alternatively, it could be a faulty cutting motor, in which case you should consult your dealer. Another possibility is that the 5A fuse of one of the cutting heads has burnt out. To resolve this, turn the machine off, open the metal case, and check the 5A fuse, replacing it if necessary.
A
Amanda StewartAug 23, 2025
What to do if my Etesia Lawn Mower shows a 'No wire signal' alarm?
- T
  Tracy KaiserAug 25, 2025
  If your Etesia Lawn Mower displays the 'No wire signal' alarm, it means that there is a problem with the wire signal. First, check that the LED at the back of the station is switched on and that the station is plugged in. If the LED at the back of the station is flashing red, it indicates a break in the wire, and you should call your dealer to repair it.
R
Rebekah BarrettAug 26, 2025
What to do if my Etesia Lawn Mower shows a 'Charge contact ?' alarm?
- L
  lisapowersAug 26, 2025
  If your Etesia Lawn Mower displays the 'Charge contact ?' alarm, it means the contact with the station isn't being made properly. Check that the charging contacts of both the station and the machine have not been oxidized.
P
Patrick JohnsonAug 27, 2025
What to do if my Etesia ET MOWER ETM105 Lawn Mower shows a 'Supply outage' alarm?
- M
  Monique WilliamsAug 28, 2025
  If your Etesia Lawn Mower displays the 'Supply outage' alarm, it means that the machine has been disconnected from its station. Check that the charging contacts of the station and the machine have not been oxidized. Also, ensure that the station has not been set up on a slope.
W
william46Aug 29, 2025
Why does my Etesia ET MOWER ETM105 operate in reverse?
- D
  Daniel ShawAug 29, 2025
  If your Etesia Lawn Mower operates in reverse, it could be due to a reversed phase of the peripheral wire, causing the robot to spin and get stuck. To fix this, reverse the phase (see 4•9•6) or reverse the wires going into the station. Also, check whether the body moves freely and ensure that the contacts are properly in the body inserts.
D
David CraneAug 31, 2025
Why does my Etesia ET MOWER ETM105 constantly move slowly?
- S
  Sandra RobinsonSep 1, 2025
  If your Etesia Lawn Mower is constantly moving slowly, it could be due to several reasons. The sonar might be contaminated or moistened, so gently clean the inside of the 2 "eyes" of the sonar with a soft cloth. There might be interference noise, meaning something on the cover or nearby is reflecting the sonar wave. The sonar could have come out of its position, so check that the sonar is well positioned and reposition it if necessary. The sonar might be faulty, requiring a technician to change it. Finally, there might be resistance on one or several cutting heads, so check whether the cutting discs turn freely.
S
Shelly JacksonSep 2, 2025
What to do if my Etesia ET MOWER ETM105 Lawn Mower shows a 'Wheel slipping' alarm?
- D
  David CampbellSep 2, 2025
  If your Etesia Lawn Mower displays the 'Wheel slipping' alarm, it means the machine is traveling an abnormal distance without finding its peripheral wire. Check that there are no muddy areas in the machine’s path.
T
Tara GreenSep 5, 2025
Why does my Etesia ET MOWER ETM105 Lawn Mower carry out squares systematically?
- M
  Monique ArroyoSep 5, 2025
  If your Etesia Lawn Mower carries out squares systematically, it is likely because the grass is too high in one area. Check that the grass of the mowing area is not too high. If it is, begin by mowing at a greater height and gradually lower the cutting heads to the desired position over several days.
L
Lynn JohnsonSep 6, 2025
What to do if my Etesia Lawn Mower shows a 'Lifted' alarm?
- T
  Thomas SmithSep 7, 2025
  If your Etesia Lawn Mower displays the 'Lifted' alarm, it is a safety feature activated when the robot is lifted. Simply restart the robot. Alternatively, the robot may have sensed a height difference due to an anomaly on the ground. Fix the ground problem so that the robot no longer detects an anomaly.