To Next Page
A
Andrea HenryNov 3, 2025
How to remove rear wheel on Etesia Lawn Mower?
- JjohnsoncrystalNov 3, 2025
To remove a rear wheel on your Etesia Lawn Mower, follow these steps: 1. Stop the engine and remove the contactor key. 2. Apply the parking brake. 3. Secure the vehicle using chocks. 4. Place a jack under the rear part of the chassis on the side where the wheel needs to be replaced and lift until this wheel does not touch the ground anymore. 5. Secure the machine by lying it on stable props. 6. Remove the wheel hub. 7. Unscrew the 3 screws with a key. 8. Remove sidewards the two securing rings. 9. You can now remove the wheel from the shaft. For remounting, follow the same instructions in the opposite way. Grease the wheel shaft and ensure you do not lose the O shape key which fits in the wheel shaft. Check the screw tightness and the tyre pressure. Front pressure: 1.5 bar for M...
General
