Ethicon DERMABOND PRINEO Application Guide

Application Guide
2. Remove the irst mesh patch from the mesh carrier
and dispose of the mesh carrier (Figure 1).
Flatten the mesh patch at the crease gently. Remove the
center section of the release backing paper from the mesh
(Figure 2).
Hold the mesh by the corners of the backing paper, ensuring
that the adhesive side of the mesh will be adhered to the
patient’s skin (Figure 3).
Pre-Application
1. Prior to applying DERMABOND PRINEO System (42 cm), ensure that the wound is clean, dry, and hemostatic. Close deep
layers such that there is no tension on the skin edges. The skin edges must be closely approximated prior to application
of the mesh, such that signiicant manual approximation is not required during mesh application.
Figure 3
Figure 2
Figure 1
DERMABOND® PRINEO® Skin Closure System (42 cm)
Do not use on patients with a known hypersensitivity to cyanoacrylate, formaldehyde, benzalkonium chloride, or pressure-sensitive adhesive.
Application highlights below.
For complete product details,
see Instructions for Use.

Ethicon DERMABOND PRINEO Specifications

General

Brand	Ethicon
Model	DERMABOND PRINEO
Category	Medical Equipment
Language	English