ETI DEC-1 - User Manual

Meter front description
El. meter
Merilni instrument
Mjerni instrument
Miernik
Měřící přístroj
Merací prístroj
Fogyasztásmérő
El. Energijos skaitiklis
Измерительный прибор
Elekro enerģijas skaitītājs
Elektriarvesti
Messgerät
DEC-1
004804050
ETI, d.o.o., Obrezija 5, SI-1411 Izlake
www.etigroup.eu/products-services
- 3 - - 4 -
- 1 - - 2 -
Dimensions
Compliance
Purpose
Functioning
A special electronic system under the influence of flowing current
and applied voltage generates pulses proportional to the drawn
energy. Energy consumption is indicated by a flashing LED. The
amount of pulses is converted into energy input, and its value is
displayed by the segment LCD display. The fractional digits repre-
sent the hundredths (.01 kWh = 10 Wh).
MID Directive 2014/32/EU
DEC-1 is a static (electronic) calibrated electricity meter of single-
phase alternating current in a direct system.
Pulse output
The meter is equipped with pulse output SO+ – SO-. This allows you
to connect another pulse device (SO) that reads pulses generated
by the meter.
No additional connected equipment is required for proper opera-
tion of the meter.
Sealing
The meter has sealable input and output terminal covers to pre-
vent any attempts to bypass the meter.
Meter number
The meter is marked with individual serial number allowing its
unambiguous identification. The marking is laser engraved and
cannot be removed.
LCD display
kWh reading LED
terminal
covers
sealing points
4,0
62,8
45
52
116,2
18
3 8 3 8 8 9 5 6 2 0 7 2 3

ETI DEC-1 Specifications

General

Brand	ETI
Model	DEC-1
Category	Measuring Instruments
Language	English

Summary

Meter Front Description

Terminal Covers

Covers for input and output terminals to prevent attempts to bypass the meter.

Sealing Points

Points for sealing input and output terminal covers to prevent bypass.

Meter Number

Individual serial number for unambiguous identification, laser engraved.

Dimensions

Compliance

MID Directive Compliance

Compliance with MID Directive 2014/32/EU for electricity meters.

Purpose

DEC-1 Meter Type

Static (electronic) calibrated electricity meter for single-phase AC.

Functioning

Pulse Generation

Electronic system generates pulses proportional to energy drawn.

Energy Indication

Consumption indicated by flashing LED; value on LCD display.

Connection Scheme

Assembly

Terminal Connections

Step-by-step guide for connecting input phase, neutral, and output.

RS-485 Network Connection

Optional connection of RS-485 network wires to specific terminals.

Terminal Sealing

Instruction to put covers on terminals and optionally seal them.

Technical Data

Electrical Specifications

Details on voltage, current, accuracy class, and MID declaration.

Pulse Output Specifications

Parameters for pulse output, including connection voltage and duration.

Physical Specifications

Information on terminals, housing material, dimensions, and protection level.

General Safety Conditions

Installation and Operation Safety

Warnings regarding manual reading, qualified personnel, and meter condition.

Grounding and Device Responsibility

User responsibility for grounding and other connected devices.

Electrical Safety Precautions

Guidance on connecting power, operational conditions, and disconnection.

Device Modification and Warranty

Prohibition of modifications and manufacturer's liability.