Need help?Do you have a question about the ETI PI-1600 and is the answer not in the manual?
Critical safety warnings for operating the test set.
Input power requirements and output current/overload capabilities of the PI-800.
Input power requirements and output current/overload capabilities of the PI-1600.
Detailed explanation of the MAC-21 control panel keys and their functions.
Guidelines for maintaining and calibrating the MAC-21 unit.
Procedures for setting up the test set and required equipment before testing.
Step-by-step guide for performing timing tests on single-pole molded case breakers.
Procedure for testing the instantaneous pickup element of single-pole breakers.
Guide for testing the instantaneous trip time of single-pole molded case breakers.
Procedure for timing tests on multi-pole molded case circuit breakers.
Procedure for testing the instantaneous pickup of multi-pole molded case breakers.
Guide for testing the instantaneous trip time of multi-pole molded case breakers.
Guidelines for routine maintenance and calibration of the PI-800 and PI-1600 units.
Recommended procedures for maintaining and calibrating the MAC-21 unit.
General| Brand | ETI |
|---|---|
| Model | PI-1600 |
| Category | Test Equipment |
| Language | English |
To Next Page
